Quick Reference Guide

SYSCFG 89
--alertpolstatus enable, disable Enables or disables the
alert policy specified
using the alertpolnum
suboption. This
suboption can be
replicated. This
suboption is dependent
on the alertpolnum
suboption.
Example (to set the
PEF configuration
parameters):
Example 1 (To
configure the PEF so
that the system is
powered down in
response to a fan failure
event):
A:>syscfg
pefcfgparams
--filter=fanfail
--filteraction=
powerdown
pefcfgparams
filter=fanfail
filteraction=
powerdown
Table 3-5. BMC and Remote Access Controller Configuration Options (continued)
Option Suboption Valid Arguments Description