Quick Reference Guide

76 SYSCFG
--alertdest 1, 2, 3, 4 Sets the destination for
the LAN alert.
This suboption can be
replicated.
--vlantag enable, disable Enables or disables
VLAN tagging. This
suboption can be
replicated.
--vlanid <string> Sets the 12-bit VLAN
ID. This suboption can
be replicated.
--vlanpriority 0–7 Sets the VLAN priority
value. This suboption
can be replicated.
--macaddress NA Displays the BMC
MAC address. This
suboption cannot be
replicated.
--nicselection shared,
sharedfailover,
dedicated,
sharedreceiveonall
Sets the operating
mode of the NIC to
shared/sharedfailover/d
edicated/sharedreceive
onall. Some of these
options are not
applicable on certain
systems.
NOTE: The
sharedreceiveonall
argument is available
only on xx1x systems.
--fullduplex enable, disable Enables or disables full
duplex on the RAC
network interface.
--autoneg enable, disable Enables or disables
autonegotiation.
Table 3-5. BMC and Remote Access Controller Configuration Options (continued)
Option Suboption Valid Arguments Description