Quick Reference Guide

50 SYSCFG
--noraidprompt* NA This option specifies that the BIOS must not
prompt for confirmation when changing the
mode of a RAID controller. This option can
only be used with the --embscsiraid or
--embscsiraidchb options.
Without this option, the user is prompted during
POST to confirm the change of a RAID controller
from RAID(SCSI) to SCSI(RAID). This option is
not replicated.
CAUTION: When changing a RAID
controller from SCSI to RAID or from RAID to
SCSI, data is lost on the affected hard drives.
The warning message for this data is not
displayed if you use the --noraidprompt
option. To avoid data loss, back up any
information on the hard drives before
changing the type of controller used with
the drives.
Example:
A:>syscfg --embscsiraid=raid
--noraidprompt
embscsiraid=raid
NOTE: The asterisk is not part of the command
syntax.
--numlock on, off This option enables or disables the keyboard
number lock during POST. This option is not
replicated.
Example:
A:>syscfg --numlock=on
numlock=on
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description