Quick Reference Guide

44 SYSCFG
--fiberchannel enable, disable This option enables or disables embedded fiber
channel. This option can be replicated.
Example:
A:>syscfg --fiberchannel=enable
fiberchannel=enable
--floppy auto, off,
readonly
This option sets the diskette drive controller to
auto, off, or read-only. This option is available on
all supported systems that have a supported
diskette drive. This option can be replicated.
Example:
A:>syscfg --floppy=auto
floppy=auto
--fsbr 115200, 57600,
19200, 9600
This option sets the console redirection fail safe
baud rate in bps.
Example:
A:>syscfg --fsbr=9600
fsbr=9600
--hddfailover off, on This option specifies the device in the hard disk
drive sequence menu that has not been
attempted in the boot sequence.When set to on,
all devices are attempted in order. When set to
off, only the first device in the hard disk sequence
is attempted. This option can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid Arguments Description