Quick Reference Guide

32 SYSCFG

Example 2:

#syscfg --bootseq=

nic.emb.1,virtual.slot.1

The following devices are set in

the boot sequence:

Device 4:* nic.emb.1 - IBA GE Slot

0638 v1226

Device 6:* virtual.slot.2 -

VIRTUALFLOPPY DRIVE

Device 2:* cdrom.emb.0 - IDE CD-

ROM device

Device 3:* hdd.emb.0 - Hard drive

Device 5:* virtual.slot.1 -

VIRTUALCDROM DRIVE

Device 1:* floppy.emb.0 - Diskette

drive A:

NOTE: The asterisk indicates that the device is

enabled in the BIOS.

--bootseqretry enable, disable This option enables or disables the boot sequence

retry feature. When set to enable, the system will

re-attempt to set the boot order after a 30 seconds

timeout if the last boot attempt has failed.

This option can be replicated.

A:>syscfg --bootseqretry=enable

bootseqretry=enable

--cmosdefaults enable, disable This option enables or disables the CMOS

defaults to be on or off in the next boot.

A:>syscfg --cmosdefaults=enable

cmosdefaults=enable

NOTE: This option is available only on x9xx, xx0x,

and xx1x systems.

Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)

Option Valid Arguments Description