Quick Reference Guide

RACADM 191
config/getconfig
Synopsis
racadm config [-p -c] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i
<
index >] < Value >
NOTE: Option -f excludes the use of the g, o, and i options.
racadm getconfig [-p] -f < filename >
racadm getconfig -g <
groupName > [-i < index >]
racadm getconfig -u <
username >
racadm getconfig -h
config Subcommand Description
The configuration subcommand allows the user to set RAC configuration
parameters individually or to batch them as part of a configuration file. After
the .cfg file has been correctly parsed, each object is read. If the content is the
same, a write to the RAC does not occur. If the data is different, that RAC
object is written with the new value.
racresetcfg Resets the RAC to the default configuration.
setrac Sets time, managed system name, operating system name, and
type from the managed system to the RAC.
Table 6-6. config/getconfig Subcommands
Command Definition
config Configures the RAC.
getconfig Gets the RAC configuration data.
Table 6-5. racadm Subcommands and Arguments (continued)
Command Description