Quick Reference Guide

RAIDCFG 149
nwc — (No-Write-Caching) specifies
that the controller does not send a
write-request completion signal after
the data is written to the disk.
NOTE: The wc and nwc options are
supported on the following RAID
controllers only: CERC SATA 1.5/CH and
PERC 3/Di.
The -wp option is optional and can be
added to the command line in any order
after the mandatory option
combination.
For SCSI controllers, the value of lun
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you need to specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks (continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description