Quick Reference Guide

RAIDCFG 131
-sz
or
size
<number> Sets the maximum size on
the virtual disk in MB or GB
if the size is not provided.
The default size is in MB. If
GB follows the number, the
size is expressed in GB.
Optional.
See Table 4-4 for
specific usage
information.
-sp
or
spanlength
<number> The span size of RAID 5,
which is a mandatory
parameter for RAID 50.
NOTE: Spanlength is
applicable only for RAID 50.
The minimum permissible
spanlength value is 3. The
number of array disks for
creating virtual disks should
not be a prime number and
should be divisible by the
specified spanlength.
Mandatory.
See Table 4-4 for
specific usage
information.
-ssz
or
stripesize
<number> Sets the stripe size on the
virtual disk in KB.
NOTE: When creating virtual
disks, do not specify the units
for chunk (stripe) size. The
units are always listed in KB.
Optional.
See Table 4-4 for
specific usage
information.
-vd
or
vdisk
NA Displays the virtual disks
under all of the controllers
along with the physical array
disks that make up the
virtual disks.
See Table 4-6 for
specific usage
information.
-vd
or
vdisk
<valid virtual disk
ID number>
Displays the specified
virtual disk.
Optional.
See Table 4-6 for
specific usage
information.
Table 4-1. RAIDCFG Short and Long Format Options (continued)
Option Valid Arguments Short Description Mandatory or
Optional