Quick Reference Guide

10 Introduction
Requirements
For Windows PE, the DTK utilities support Windows PE version 2005 (created
using 32-bit version of Microsoft Windows Server
®
2003, Service Pack 1 [SP1])
and Windows PE 2.0 (created using 32-bit version built on the Windows
Vista
®
kernel).
NOTE: DTK utilities do not support Windows PE created with any 64-bit version of
Microsoft Windows Server 2003.
For embedded Linux, the DTK utilities can be run on Red Hat
®
Enterprise
Linux
®
(version 4, update 4) 32-bit.
Toolkit Utilities
Overview
DTK contains utilities that allow you to configure the BIOS, baseboard
management controller (BMC), remote access controller (RAC),
RAID controllers, and hard-drive partitions on supported Dell systems.
Additionally, the utilities can be integrated with the sample files provided
with the toolkit to fully configure one-to-many target systems in a scripted
mass system deployment.
NOTE: In a Linux environment, the DTK utilities do not have a .exe extension.
System Configuration Utility
The SYSCFG utility performs the following tasks:
• Reports and sets BIOS configuration options
• Reports and sets BMC/RAC configuration options
• Reports and sets user-configurable states
• Reports system information, including PCI device detection
RAID Configuration Utility
The RAIDCFG utility reports and sets RAID configuration options.