User's Manual

104 Preparing the Directory Structure for Deployment in Embedded Linux
You can use the Dell Systems Build and Update Utility and the Systems
Service and Diagnostics Tools
on the Dell Systems Management Tools and
Documentation
DVD supplied with your system to:
• Streamline the operating system installation
• Setup and configure your system, including automatic discovery and
configuration of Dell-provided RAID controllers and network adapters
• Access and load the latest utilities, drivers, and diagnostics for your system
• Install Dell OpenManage™ systems management software
NOTE: You can also obtain the latest drivers from the Dell Support website at
support.dell.com.
For complete information about using the Dell Systems Build and Update
Utility
and the Dell Systems Service and Diagnostics Tools, see the Dell
Systems Build and Update Utility Quick Reference Guide and the Dell Systems
Service and Diagnostics Tools Quick Installation Guide respectively, which are
available on the Dell Support website at support.dell.com and
on the
Dell Systems Management Tools and Documentation DVD .
After you have loaded the operating system and all applicable device drivers
from the
Systems Build and Update Utility and Systems Service and
Diagnostics Tools, check the Dell Support website at support.dell.com for
the latest drivers. Put all necessary drivers to be used in the deployment in the
system directory for the target system. For example, if your target system is a
PowerEdge 1850, put all necessary files in the /opt/dell/toolkit/systems/pe1850
directory; or if your target system is a PowerEdge 850, put all necessary files in
the /opt/dell/toolkit/systems/pe0850 directory.
How to Obtain Dell Utility Partition Files
Obtain the Dell utility partition files from /opt/dell/toolkit/systems, the Dell
Support website at support.dell.com, or the Systems Build and Update
Utility
on the Dell Systems Management Tools and Documentation DVD .
RAC Configuration
Configure the RAC on your source system using the racadm utility, if
applicable. See the Dell Remote Access Controller Racadm User's Guide for
comprehensive information about using the racadm utility to configure the
RAC on your source system.