User's Manual

Preparing the Directory Structure for Deployment in Microsoft Windows PE 41
Drivers
Table 3-5 describes the essential and optional drivers required for
Dell-supported hardware to build your Windows PE environment.
NOTE: The drivers provided have been tested successfully in the Windows PE
environment built during the test.
Table 3-4. Documentation
Toolkit Components Purpose
CLI Reference Guide Describes all DTK utilities, including all command line
arguments and values, syntax, help, and examples.
User’s Guide Contains best practices guidelines for performing a scripted
deployment.
Table 3-5. Drivers
Drivers Purpose
winpe1.x\
DRIVERINST.BAT
Used to install Dell-provided drivers (from
Z:\Dell\Drivers) into the customized Windows PE 2005
image.
winpe2.x\
VPE_DRIVERINST.BAT
Used to install Dell-provided drivers (from Z:\Dell\Drivers)
into the customized Windows PE 2.0 image.
common\Hardware
application
programming interface
(HAPI)
Essential drivers for the DTK tools to work.
winpe1.x\Mass Storage Essential drivers for mass storage controllers (for example,
RAID and SAS [Serial Attached SCSI]) to work.
winpe2.x\Mass Storage Essential drivers for mass storage controllers (for example,
RAID and SAS [Serial Attached SCSI]) to work.
winpe1.x\Network
interface card (NIC)
Recommended drivers for NICs.
winpe2.x\NIC Recommended drivers for NICs.
common\RAC 4 Essential drivers for RACADM to work.
common\RAIDCFG Essential drivers for RAIDCFG to work.