User's Manual

Preparing the Directory Structure for Deployment in Microsoft Windows PE 39
Sample Scripts
Table 3-3 lists sample scripts of those necessary to perform a scripted
deployment. The sample scripts are located in
Z:\Dell\Toolkit\template\scripts
.
NOTE: All DTK scripts are provided as examples only. Many of these sample
scripts must be edited before they can be used in a deployment. Some customers
may need to develop their own scripts entirely from scratch. Customers deploying
multiple systems must provide unique information for each Dell system where
appropriate. For example, system host names, IP addresses, and BIOS asset tags
need to be unique for each system. The batch scripts and configuration files must
be modified to reflect the unique information for each deployed system. Many
options are available to optimize this process. See "Preparing the Script Files for
Deployment Using Microsoft Windows PE" for information about using the sample
scripts to perform a full deployment on supported Dell systems.
WINBOM.INI Sample file used to start
the racsvc and mr2kserv
services.
Z:\Dell\Toolkit\template\Configs
WINPEOEM.
SIF
Sample file to add support
for Dell mass storage
drivers.
Z:\Dell\Toolkit\template\Configs
Table 3-3. Sample Scripts
Toolkit Components Purpose
createup.cfg This file is used by UPINIT.BAT.
DISKPARTCLR.CFG Used by PARTCFG.BAT to clear the partitions on the
selected disks.
DISKPARTOS.CFG Used by PARTCFG.BAT to create deployment
partition to install the operating system.
ERRHNDL.BAT Handles errors returned in the DTK scripts.
LISTUP.CFG This file is used by UPINIT.BAT.
MOUNTUP.CFG This file is used by UPINIT.BAT.
Table 3-2. Sample Configuration Files (continued)
Toolkit
Components
Purpose Location