User's Manual

Preparing the Directory Structure for Deployment in Microsoft Windows PE 37
Sample Configuration Files
Table 3-2 describes examples of configuration files used to perform a scripted
deployment. These files are located in Z:\Dell\Toolkit\template\Configs
folder.
NOTE: All configuration files are provided as examples only. These sample
configuration files must be edited before they can be used in any deployment tasks.
RAC 5 Configures DRAC 5.
racadmErrorCodes.txt Lists the error codes and messages for the RACADM.EXE
tool.
RAIDCFG.EXE Creates and reports Redundant Array of Independent Disks
(RAID) information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the RAIDCFG.EXE
tool.
stsvc.ini Configuration file used by RAIDCFG.EXE.
NOTE: Do not edit this file. Incorrect edits might cause
RAIDCFG.EXE to fail.
sys.ini A .ini file used with syscfg.
SYSCFG.EXE
• Reports and configures:
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
• Maintains system state between reboots
• Reports hardware devices and other system-related
information
SyscfgErrorCodes.txt Lists the error codes and messages for the SYSCFG.EXE
tool.
sysdrmk.exe Used by UPINIT.BAT to patch the boot sector and Master
Boot Record (MBR).
UpinitErrorCodes.txt Lists the error codes and messages for UPINIT.BAT.
version.txt Contains the DTK version in use.
Table 3-1. System Utilities and Supporting Files (continued)
Toolkit Components Purpose