User's Manual

12 Introduction
NOTICE: The best practices guidelines described in this document were
developed and tested on specific systems with specific hardware and software
configurations. As a result, the examples and instructions described in this guide
are not applicable to every environment. The open nature of the DTK utilities and
scripting methodology is designed to allow the flexibility to modify the examples,
procedures, and suggestions to best fit your specific environment. Using the DTK
examples without first making modifications based on your specific IT environment
is likely to result in failed deployments.
Information in this guide is distinctly divided for Windows PE and embedded
Linux. Even though the nature of topics covered for both environments is
similar, the contents are very different, and has been organized into separate
sections. This will enable the user to read only those sections that are
relevant. Content in this User’s Guide is organized as documented in
Ta b le 1 - 1 .
Table 1-1. Information Organization in This Guide
Topics Section for
Windows PE
Section for
Embedded Linux
Introduction, that includes
information on:
•DTK
• What’s new for this release
• Prerequisites and requirements
• DTK deployment overview
Introduction Introduction
Planning, that includes best
practices for choosing a deployment
method
"Choosing a Microsoft
Windows PE-Based
Deployment Method"
"Choosing an
Embedded Linux-Based
Deployment Method"