Quick Reference Guide

76 SYSCFG
--loaddefaults* NA NA Restores the BMC to
the defaults that were
originally loaded on the
controller. This option
is used to return the
BMC to a known-good
state. This option
cannot be replicated.
NOTE: The NMI, power
button, and SOL defaults
are not reset by using
this option.
Example:
A:>syscfg --
loaddefaults
Loading
defaults...
NOTE: The asterisk is
not part of the command
syntax.
Table 3-4. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid Arguments Description