Quick Reference Guide

SYSCFG 63
SYSCFG for BMC and Remote Access Controller
Configuration
SYSCFG configures BMC and Remote Access Controller settings.
NOTE: Some of the following options or arguments might not be available on all
systems.
NOTE: For options that use text strings such as username, password, hostname,
and community string, using some characters such as <space>, <, >, |, or = on the
command line can be misinterpreted by the command line parser and cause errors.
NOTE: The following options or arguments are also applicable to DRAC 5.
The following tables document valid options, suboptions, and arguments
along with a description of the expected behavior of each option and
suboption. Options, suboptions, and arguments are case sensitive. All
options, suboptions, and predefined arguments are lowercase unless explicitly
stated otherwise.
--valsetuppwd <string> Validates the setup password for TPM
authentication. If you try to change DTK
settings, you will be prompted to enter this
password to access the settings.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --valsetuppwd=
<setup_password>
--
setuppwdover
ride
NA On systems that do not have a setup
password configured, if you set this option,
you will not be prompted for a password to
access DTK settings.
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --setuppwdoverride
Table 3-3. Suboptions and Arguments for the tpm Option (continued)
Option Suboption Arguments Description