Quick Reference Guide

62 SYSCFG
--tpmactivation enabled Enables and activates the TPM feature.
disabled Disables and deactivates the TPM feature.
nochange Does not alter the operational state of the
TPM feature.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
setuppwdoverride
NOTE: You cannot set tpmactivation when tpmsecurity is
set to off.
NOTE: After setting tpmactivation to enabled or disabled, if
you reboot your system, DTK displays the ’TPM
Configuration Honoured system will reset
and the system reboots again’ message and
reboots once again.
--tpmclear NA Clears the contents of the TPM chip
without erasing the tpmsecurity and
tpmactivation settings.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
tpmclear --setuppwdoverride
--
undotpmclear
NA Undoes the result of the tpmclear setting.
If you specify this setting before specifying
the tpmclear setting, the ‘There is
currently no pending TPM Clear
request’ message is displayed.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
undotpmclear --
setuppwdoverride
Table 3-3. Suboptions and Arguments for the tpm Option (continued)
Option Suboption Arguments Description