Quick Reference Guide

SYSCFG 47
--noraidprompt* NA This option specifies that the BIOS must not
prompt for confirmation when changing the
mode of a RAID controller. This option can only
be used with the --embscsiraid or --
embscsiraidchb options. Without this option, the
user is prompted during POST to confirm the
change of a RAID controller from RAID(SCSI) to
SCSI(RAID). This option is not replicated.
NOTICE: When changing a RAID controller
from SCSI to RAID or from RAID to SCSI, data
is lost on the affected hard drives. You do not
see the message warning you of this data
loss when using the --noraidprompt option. To
avoid data loss, back up any information on
the hard drives before changing the type of
controller used with the drives.
Example:
A:>syscfg --embscsiraid=raid --
noraidprompt
embscsiraid=raid
NOTE: The asterisk is not part of the command
syntax.
--numlock on, off This option enables or disables the keyboard
number lock during POST. This option is not
replicated.
Example:
A:>syscfg --numlock=on
numlock=on
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description