Quick Reference Guide

42 SYSCFG
--floppy auto, off,
readonly
This option sets the diskette drive controller to
auto, off, or read-only. This option is available on
all supported systems that have a supported
diskette drive. This option can be replicated.
Example:
A:>syscfg --floppy=auto
floppy=auto
--fsbr 115200,
57600,
19200, 9600
This option sets the console redirection fail safe
baud rate in bps.
Example:
A:>syscfg --fsbr=9600
fsbr=9600
--hddfailover off, on This option specifies the device in the hard disk
drive sequence menu that has not been
attempted in the boot sequence.When set to on,
all devices are attempted in order. When set to
off, only the first device in the hard disk sequence
is attempted. This option can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
--hwprefetcher enable,
disable
When set to enable, this option makes the
processor look ahead and see what data might be
needed next. When some data is found, it loads
several steps in advance.
When set to disable, it does not look ahead.
This option can be replicated.
Example:
A:>syscfg --hwprefetcher=enable
hwprefetcher=enable
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description