Quick Reference Guide

SYSCFG 39
--embsataraid off,
combined,
ata, raid,
qdma
This option configures an embedded SATA RAID
controller. This option can be replicated.
off — disables the embedded SATA RAID
controller.
combined — sets the SATA RAID controller to
combined mode.
ata — sets SATA RAID controller to ATA mode.
raid — sets SATA RAID controller to RAID
mode.
qdma — sets the SATA RAID controller to
support ATAPI devices at transfer rates much
higher than PIO. A device driver must be installed
on your system to use the the QDMA mode.
Example:
A:>syscfg --embsataraid=off
embsataraid=off
--embscsi1 on, off This option enables or disables the first
embedded SCSI controller. This option is only
valid for supported systems that have an
embedded SCSI controller. This option can be
replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
--embscsi2 on, off This option enables or disables the second
embedded SCSI controller. This option is only
valid for supported systems that have an
embedded SCSI controller. This option can be
replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description