Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 373
--lcd2 <string> Sets the second line of user-
defined LCD strings.
NOTE: Before setting user
strings for this option, ensure
that --lcd is set to user.
NOTE: If you have a Dell™
PowerEdge™ x6xx, x7xx, or
x8xx system, you need to
reboot your system for the
settings to take effect.
Yes
--logicproc enable,
disable
Enables or disables the
logical processor
(Hyperthreading).
Yes
--lpt disable, lpt1,
lpt2, lpt3
Disables or sets the parallel
port address.
Yes
--lptmode at, ps2 Sets the parallel port mode. Yes
--mem* none Reports the size of system
memory.
NOTE: The asterisk is not part
of the command syntax.
Yes
--memintleave enable,
disable
Enables or disables the
memory interleave mode.
Yes
--memremap off, auto Enables or disables memory
remapping.
Yes
--memtest enable,
disable
Enables or disables the
power-on self-test (POST)
extended memory test.
Yes
--mouse on, off Turns the mouse controller
on or off.
Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid
Arguments
Description Replicated