Quick Reference Guide

Summary of SYSCFG and RAIDCFG Options 371
--embscsiraid raid, off, scsi
or
raid, off
Enables or disables the
embedded SCSI RAID
controller.
Yes
--
embscsiraidchb
raid, scsi Sets the second channel of
the embedded SCSI RAID
controller to operate in
RAID or SCSI mode.
Yes
--extserial com1, com2,
rad
Sets the behavior of the
external serial connector.
Yes
--fiberchannel enable,
disable
Enables or disables
embedded fiber channel.
Yes
--floppy auto, off,
readonly
Enables or disables the
diskette drive controller.
Yes
--fsbr 115200,
57600,
19200, 9600
Sets the console redirection
fail safe baud rate.
Yes
--hwprefetcher enable,
disable
Enables or disables hardware
prefetching by the processor.
Yes
--hddfailover off, on Specifies which device in the
hard disk drive sequence
menu is attempted in the
boot sequence.
Yes
-i
or
--infile
<filename> Reads BIOS configuration
options from a file. A file can
be generated with the -o
option.
No
--idecdrom auto, off Enables or disables the CD
drive controller.
Yes
--idectrl auto, off Enables or disables the IDE
controller.
Yes
--idracgui enable,
disable
Enables or disables iDRAC
GUI.
Yes
Table E-1. SYSCFG Options (continued)
Options Suboptions Valid
Arguments
Description Replicated