Quick Reference Guide

Messages and Codes 331
176 Invalid array disks or failover drives
selected for reconfigure/create operation.
Please make sure that all array disks and
failover drives associated with the virtual
disk are selected.
177 The maximum number of partitions have
already been created on one of the selected
array disk(s). Each array disk can hold
portions (partitions) of up to 10 virtual
disks. This virtual disk cannot be created
because one or more array disk(s) have
reached the partition limit.
178 The virtual disk is in use. Please close any
applications that use the virtual disk and
unmount any file systems that reside on the
virtual disk.
179 The firmware version is not supported.
Please update the firmware from
http://support.dell.com.
180 The specified device does not have enough
free space to be used as failover space for
the specified virtual disk.
181 The operation failed. Please rescan the
controller and retry the operation.
182 The operation cannot be performed while a
task is running on the specified virtual
disk.
183 The specified virtual disk has no dead disk
segments.
Table B-5. RAIDCFG Error Codes and Messages (continued)
Error Code Message