Quick Reference Guide

SYSCFG 33
--conboot enable,
disable
This option configures or reports whether console
redirection occurs after boot. This option is
available on all supported systems that support
console redirection. This option can be replicated.
Example:
A:>syscfg --conboot=enable
conboot=enable
--conred serial1,
serial2, off,
bmcsol, mmb
This option configures or reports the
communication port for console redirection. If
this option is set to a serial port, then the serial
port option is not available. See the descriptions
for --serial1 and --serial2. If only one serial port is
present on a system, the serial2 argument is not
available. This option can be replicated.
Example:
A:>syscfg --conred=serial1
conred=serial1
--conterm vt100, ansi This option configures or reports the terminal
type for console redirection. This option is
available on all supported systems that support
console redirection. This option can be replicated.
Example:
A:>syscfg --conterm=vt100
conterm=vt100
--dbpm enable,
disable
This option enables or disables demand-based
power management. This option can be
replicated.
Example:
A:>syscfg --dbpm=enable
dbpm=enable
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description