Quick Reference Guide

302 DRAC III, DRAC 4, and DRAC 5 Property Database Group and Object Definitions
cfgIpmiSerial
This group
specifies
properties
used to
configure the
IPMI serial
interface of
the BMC.
cfgIpmiSerial
Connection
Mode
When the DRAC 5
cfgSerialConsoleEnable
property is set to 0
(disabled), the DRAC 5
serial port becomes the
IPMI serial port. This
property determines the
IPMI defined mode of the
serial port.
In Basic mode, the port
uses binary data with the
intent of communicating
with an application
program on the serial
client. In Terminal mode,
the port assumes that a
dumb ASCII terminal is
connected and allows very
simple commands to be
entered.
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
1 (Terminal)
0 (Basic)
1
cfgIpmiSerial
BaudRate
Specifies the baud rate for
a serial connection over
IPMI.
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
9600, 19200,
57600, 115200
57600
Table A-3. DRAC 5 Object Groups and Objects
Object Group Objects Description Valid Values Default