Quick Reference Guide

SYSCFG 29
--asset <string> This option reports or sets the customer-
programmable asset tag number for a system. The
maximum length of an asset tag is 10 characters.
Asset tag values cannot contain any spaces. This
option is available on all supported systems. This
value can be replicated.
Example:
A:>syscfg --asset=
ASSETTAG
asset= ASSETTAG
--assignintr standard,
distributed
This option controls the interrupt assignment of
PCI devices in the system. This option is set to
standard by default, causing standard interrupt
routing that uses interrupt A, B, C, D for all PCIe
devices. When set to distributed, the interrupt
routing is swizzled at the MCH root ports to
minimize sharing of interrupts across all PCIe
(and PCI-X in the Programmable Interrupt
Controller (PIC) mode) devices.
Example:
A:>syscfg --assignintr=standard
assignintr=standard
--bezelir enable,
disable
This option enables or disables the ESM to
monitor and log front bezel intrusion conditions.
Example:
A:>syscfg --bezelir=enable
bezelir=enable
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description