Quick Reference Guide

282 DRAC III, DRAC 4, and DRAC 5 Property Database Group and Object Definitions
cfgNetTuning
This group
enables users
to configure
the advanced
network
interface
parameters
for the RAC
NIC. When
configured,
the updated
settings may
take up to a
minute to
become
active.
cfgNetTuning
NicAutoneg
Enables autonegotiation of
physical link speed and
duplex. If enabled,
autonegotiation takes
priority over values set in
the
cfgNetTuningNic100MB
and
cfgNetTuningNicFullDupl
ex objects.
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
1 (TRUE)
0 (FALSE)
1
cfgNetTuning
Nic100MB
Specifies the speed to use
for the RAC NIC. This
property is not used if
cfgNetTuningNicAutoNeg
is set to 1 (enabled).
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
0 (10 MBit)
1 (100 MBit)
1
cfgNetTuning
NicFullDuplex
Specifies the duplex
setting for the RAC NIC.
This property is not used if
cfgNetTuningNicAutoNeg
is set to 1 (enabled).
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
0 (Half Duplex)
1 (Full Duplex)
1
Table A-3. DRAC 5 Object Groups and Objects
Object Group Objects Description Valid Values Default