Quick Reference Guide

266 DRAC III, DRAC 4, and DRAC 5 Property Database Group and Object Definitions
cfgNicUseDh
cp
Specifies whether DHCP is
used to assign the RAC IP
address. If this property is
set to 1 (TRUE), then the
RAC IP address, subnet
mask, and gateway are
assigned from the DHCP
server on the network. If
this property is set to 0
(FALSE), the static IP
address, subnet mask, and
gateway is assigned from
the cfgNicIpAddress,
cfgNicNetmask, and
cfgNicGateway properties.
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
If you are updating your
system remotely, use the
setniccfg command.
1 (TRUE)
0 (FALSE)
0
cfgNicSelecti
on
Specifies the current mode
of operation for the RAC
network interface
controller (NIC). For
details about the
supported modes, see the
Dell Remote Access
Controller 5 Firmware
Version 1.30 User's Guide.
To modify this property,
you must have Configure
DRAC 5 permission. This
object has read/write
attributes.
0 (shared)
1 (shared with
failover)
2 (dedicated)
2
Table A-3. DRAC 5 Object Groups and Objects
Object Group Objects Description Valid Values Default