Quick Reference Guide

DRAC III, DRAC 4, and DRAC 5 Property Database Group and Object Definitions 199
DRAC III, DRAC 4, and DRAC 5
Property Database Group and
Object Definitions
The Dell Remote Access Controller (DRAC) III, DRAC 4, and DRAC 5
property database contain the configuration information for the DRAC III,
DRAC 4, and DRAC 5 controllers respectively. Data is organized by
associated object, and objects are organized by object group. The IDs for the
groups and objects that the property database supports are listed in this
section.
Use the group and object IDs with the RACADM utility to configure the
DRAC controllers. The following sections describe each object and indicate
whether the object is readable, writable, or both.
NOTICE: Object and group IDs in this section are system specific. Some may not be
applicable to your system.
DRAC III Object Groups
Use the following syntax to configure DRAC III controllers:
racadm getconfig -g <groupName> -o <objectName>
<Value>
For example, to always monitor the external source of power such an AC power
adapter, type:
racadm config -g cfgMonitor -o
cfgMonitorExtPwrScrRule 1
Table A-1 lists the object groups for DRAC III, a brief description of the
objects, and valid values for these objects.