Quick Reference Guide

RACADM 177
• racreset
• racresetcfg
• setrac
NOTE: Some of the following options or arguments might not be available on all
systems.
racadm Command
Description
Without options, the RACADM utility executes the help command, which
displays a list of available tests and a one-line description of each. The
RACADM utility help <
subcommand > displays any syntax and command
line options.
racadm Syntax
racadm < options > < subcommand > < subcommand_options >
racadm Options
The base racadm command has the following options and arguments:
Enabling and Disabling Remote Security
NOTE: It is recommended that you run these commands on your local system. You
must reset the RAC controller to enable these commands.
Table 6-2. racadm Command Help Option
Command Definition
racadm Command line status and configuration utility for RACs.
Table 6-3. Base racadm Command Options and Arguments
Option Description
-l <lvl> Specifies the log level for debug.
NOTE: Ensure that you run this option from a writable folder.
-v <lvl> Specifies the verbose level for screen output.
-L <file> Specifies a debug log file.