Quick Reference Guide

RAIDCFG 137
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ
, ...
[or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target:
lun,
channel:target:
lun,...
[or
channel:target:
enclosure,...]
-str
or
strict
<number> Strict (-str parameter) is the
percentage of expected array disk
utilization.
Example:
A:> raidcfg -ctrl -ac=
cvd -c=0 -ad=0:0,0:1 -r=
1 -str=20
If the unused portion of an array disk is
greater than the above percent, raidcfg
will abort.
For SCSI controllers, the value of lun
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which
case you need to specify values for
channel, target, and enclosure.
Table 4-4. Creating Virtual Disks (continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description