Quick Reference Guide

134 RAIDCFG
NOTE: The PERC 4/IM controller has a
fixed set of read, write, and cache
policies. If you set any of these policies
while creating a virtual disk, your
settings will be ignored.
rc — (Read-Caching) Enables read
caching.
nrc — (No-Read-Caching) Disables
read caching.
NOTE: The rc and nrc options are
supported on the following RAID
controllers only: CERC SATA 1.5/CH and
PERC 3/Di.
The -rp option is optional and can
be added to the command line in
any order after the mandatory
option combination.
NOTICE: If the controller is
changed from SCSI to RAID mode,
expect data loss to occur. Back up
any data you want to save before
changing the modes.
Table 4-4. Creating Virtual Disks (continued)
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameter
Arguments
Description