Quick Reference Guide

RAIDCFG 127
Creating Virtual Disks
Table 4-4 lists the RAIDCFG options, parameters, and predefined arguments
for creating virtual disks.
NOTE: If you create a virtual disk on Windows PE, you need to reboot your system.
NOTE: On CERC SATA 1.5/2S, CERC SATA 1.5/6CH, SAS 5/iR, and SAS 6/iR
controllers, use the entire array disk to create a virtual disk.
-c
or
controlle
rid
<valid
controller
ID
number>
Displays the properties for the RAID
controller with the specified controller ID.
This option combination is mandatory.
Example:
A:>raidcfg -ctrl -c=2
Controller_ID/Slot_ID: 2
Controller_PCI_ID: 8:14:0
Controller_Name: PERC 4e/DC
Channels: 2
Virtual_Disks: 1
Firmware Version: 521S
RAIDCFG Command successful!
Table 4-3. Enumerating RAID Controllers (continued)
Mandatory
Options and
Arguments
Optional
Paramet
ers
Valid
Parameters
Arguments
Description