Quick Reference Guide

RAIDCFG 123
-sp
or
spanlength
<number> The span size of RAID 5, which is a
mandatory parameter for RAID 50.
NOTE: Spanlength is applicable only
for RAID 50. The minimum permissible
spanlength value is 3. The number of
array disks for creating virtual disks
should not be a prime number and
should be divisible by the specified
spanlength.
Mandatory.
See Table 4-4
for specific
usage
information.
-ssz
or
stripesize
<number> Sets the stripe size on the virtual disk
in KB.
NOTE: When creating virtual disks, do
not specify the units for chunk (stripe)
size. The units are always listed in KB.
Optional.
See Table 4-4
for specific
usage
information.
-vd
or
vdisk
NA Displays the virtual disks under all of
the controllers along with the physical
array disks that make up the virtual
disks.
See Table 4-6
for specific
usage
information.
-vd
or
vdisk
<valid virtual
disk ID number>
Displays the specified virtual disk. Optional.
See Table 4-6
for specific
usage
information.
-ver
or
version
NA Displays the version number of the
utility.
Optional.
See
Table 4-12
for specific
usage
information.
Table 4-1. RAIDCFG Short and Long Format Options (continued)
Option Valid Arguments Short Description Mandatory or
Optional