Quick Reference Guide

122 RAIDCFG
-r
or
raid
<valid RAID level
number>
Sets the RAID level for the array.
Valid RAID values are 0, 1, 5, 10, 50.
If no value is specified for RAID, 0 is
taken as the default level.
Optional.
See Table 4-4
for specific
usage
information.
-rp
or
readpolicy
ra, ara, nra, rc, nrc Sets the read policy for the virtual
disk.
Optional.
See Table 4-4
for specific
usage
information.
-se
or
setenvironme
nt
NA Sets a user-defined environment
variable to the value returned from
the function call. Function calls are:
getcontrollerslots,
getfirmware,
getcontrollertype,
getadisks, getadiskcount,
getfreeadisks,
getfreeadiskcount,
getfreeadisksize,
gethotspares.
Mandatory.
See Table 4-9
for specific
usage
information.
-si
or
silent
NA Does not display any information on
the terminal console.
Optional.
See
Table 4-12
for specific
usage
information.
-sz
or
size
<number> Sets the maximum size on the virtual
disk in MB or GB if the size is not
provided.
The default size is in MB. If GB
follows the number, the size is
expressed in GB.
Optional.
See Table 4-4
for specific
usage
information.
Table 4-1. RAIDCFG Short and Long Format Options (continued)
Option Valid Arguments Short Description Mandatory or
Optional