Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell OpenManage Deployment Toolkit Version 2.4
12345678
file:///T|/htdocs/SOFTWARE/dtk/2.4/Readme/readme_win.txt[10/23/2012 9:51:03 AM]
partition.
======================================================================
TOOLS NOTES
======================================================================
* SYSCFG:
- Some options may not be present on all systems, which may
be due to the BIOS version or hardware feature set. The usage
information generated by running SYSCFG without arguments shows
only those options that are valid for your system.
- The "--devseq" option is present only if you have an
available, bootable hard-disk partition. If this option is
present in the configuration file, but not present on your
system, you will receive a usage error.
- If you perform operations that change the "--redmem"
option, you should immediately reboot the system. This note
applies to command-line usage as well as "--infile" usage.
NOTE: Additionally, the "--redmem" option should not be issued
with any other command and should be immediately followed
by a system reboot. This note is important when you
develop scripts that can alter the "--redmem" setting.
- For options that use text strings such as username,
password, hostname, and community string, using characters
such as <space>, "<," ">," "|," "=" on the command line can be
misinterpreted by the command line parser and may cause errors.
Use only alphanumeric characters to avoid these errors.
- If you set the username using the syscfg "username" option,
SOL access for the corresponding user will be enabled by
default. You can disable SOL access for a user using the
"syscfg solaction --userid=<userid> --action=disable" command.
- The maximum reliably supported baud rates ( --solbitrate ) are:
- 19200 for PowerEdge x8xx systems.
- 57600 for PowerEdge x9xx systems without Dell Remote
Access Controller 5 (DRAC 5).
- 115200 for PowerEdge x9xx systems with DRAC 5.
If you enter an unsupported baud rate, you may receive an error,
"Parameter out of range."
* RAIDCFG:
- When creating virtual disks, the chunk (stripe) size is always