User's Manual

Preparing the Script Files for Deployment Using Microsoft
®
Windows
®
PE 37
– RACREP.BAT — Applies the RAC configuration settings saved in a file to the current system.
•
TKENVSET.BAT — Used by RACREP.BAT to inform the task scripts where to find the
DTK utilities, scripts, and configuration files.
•
RACADM.EXE — Used by RACREP.BAT to replicate RAC information and to
configure settings.
– SYSCAP.BAT — Captures BIOS and BMC configuration settings and saves them to a file.
•
TKENVSET.BAT — Used by SYSCAP.BAT to inform the task scripts where to find the
DTK utilities, scripts, and configuration files.
•
SYSCFG.EXE — Used by SYSCAP.BAT to configure the BIOS and BMC settings.
–
SYSREP.BAT — Applies the BIOS and BMC settings saved in a file to the current system.
•
TKENVSET.BAT — Used by SYSREP.BAT to inform the task scripts where to find the
DTK utilities, scripts, and configuration files.
•
SYSCFG.EXE — Used by SYSREP.BAT to configure the BIOS and BMC settings.
–
RAIDCFG.BAT — Configures the selected Redundant Array of Independent Disks (RAID)
controller detected in the system.
•
TKENVSET.BAT — Used by RAIDCFG.BAT to inform the task scripts where to find the
DTK utilities, scripts, and configuration files.
•
RAIDCFG.EXE — Used by RAIDCFG.BAT to retrieve RAID information and to
configure settings.
–
PARTCFG.BAT — Creates and populates the Dell™ utility partition (UP) and the operating
system partition on a specified disk.
•
TKENVSET.BAT — Used by PARTCFG.BAT to inform the task scripts where to find the
DTK utilities, scripts, and configuration files.
•
DISKPART.EXE — Provided by Windows; this script is used to create partitions on your
disk. When creating a Windows PE image, ensure that
DISKPART.EXE tool is present in
the
Windows PE image you created. This script uses the following files for noninteractive
(unattended) operations:
•
UPINIT.BAT — Used by PARTCFG.BAT create and populate the Dell utility partition.
•
FORMAT.EXE — Provided by Windows to format the partition.