User's Manual

26 Preparing the Directory Structure for Deployment in Microsoft
®
Windows
®
PE
Sample Configuration Files
Table 3-2 describes examples of configuration files used to perform a scripted deployment. These files are
located in Z:\Dell\Toolkit\template\Configs folder.
NOTE: All configuration files are provided as examples only. These sample configuration files must be edited
before they can be used in any deployment tasks.
SYSCFG.EXE
• Reports and configures:
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
• Maintains system state between reboots
• Reports hardware devices and other system-related information
SyscfgErrorCodes.txt Lists the error codes and messages for the SYSCFG.EXE tool.
sysdrmk.exe Used by UPINIT.BAT to patch the boot sector and Master Boot Record (MBR).
UpinitErrorCodes.txt Lists the error codes and messages for UPINIT.BAT.
version.txt Contains the DTK version in use.
Table 3-2. Sample Configuration Files
Toolkit Components Purpose Location
RACCFG.INI Sample configuration file for DRAC 4
remote access controllers.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
RAIDCFG.INI Sample output file to enable RAID
replication.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
SYSCFG.INI Sample configuration file for SYSCFG
utility to configure the BIOS and
BMC settings.
Move to the directory
Z:\Dell\Toolkit\Systems\<system>.
UNATTEND.TXT Sample file used with unattended
installation of Microsoft Windows
operating systems. This file is populated
with all the necessary information for
Dell-supported mass storage devices.
Move to the directory
Z:\Dell\Toolkit\Systems\<system> after the
UNATTEND.TXT file is edited.
WINBOM.INI Sample file used to start the racsvc and
mr2kserv services.
Z:\Dell\Toolkit\template\Configs
WINPEOEM.SIF Sample file to add support for Dell mass
storage drivers.
Z:\Dell\Toolkit\template\Configs
Table 3-1. System Utilities and Supporting Files (continued)
Toolkit Components Purpose