User's Manual

Preparing the Directory Structure for Deployment in Microsoft
®
Windows
®
PE 25
The DTK sample configuration files are in Z:\Dell\Toolkit\template\Configs.
The DTK User’s Guide and CLI Reference Guide are in Z:\Dell\Toolkit\Docs.
The directory Z:\Dell\Toolkit\Systems is created as a placeholder that can be used for all system
information that is captured using sample scripts and tools (for example, the system specific basic
input/output system (BIOS) and baseboard management controller (BMC) configuration files used by
the DTK utilities for configuring a system).
See "Setting Up a Directory Structure for Deployment" for further discussion of the deployment
directory structure.
DTK Contents
The DTK contains Windows PE-based utilities, sample scripts, sample configuration files, drivers, and
documentation for automating the deployment of Dell systems. The following sections provide a
complete list of the DTK contents and a short description of each component. For a more complete
explanation of the DTK utilities, see the CLI Reference Guide. For an explanation of the sample
configuration files and scripts, see "Editing the Sample Batch Files to Perform a Complete System
Deployment in Windows PE."
System Utilities and Supporting Files
Table 3-1 describes the files, located in Z:\Dell\Toolkit\Tools. These are the core tools (utilities) that
perform pre-operating system configuration and deployment tasks. See the CLI Reference Guide for
complete information about the capabilities of each DTK utility.
Table 3-1. System Utilities and Supporting Files
Toolkit Components Purpose
config.ini Configuration file used by RAIDCFG.EXE.
NOTE: Do not edit this file. Incorrect edits might cause RAIDCFG.EXE to fail.
mr2kserv.exe Service that needs to be running for RAIDCFG.EXE to function.
pci.ids Used with SYSCFG.EXE to report PCI devices.
RAC 5 Configures Dell Remote Access Controller (DRAC) 5 remote access controllers.
RACADM.exe Configures DRAC 4/P and DRAC 4/I remote access controllers.
racadmErrorCodes.txt Lists the error codes and messages for the RACADM.EXE tool.
RAIDCFG.EXE Creates and reports Redundant Array of Independent Disks (RAID)
information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the RAIDCFG.EXE tool.
stsvc.ini Configuration file used by RAIDCFG.EXE.
NOTE: Do not edit this file. Incorrect edits might cause RAIDCFG.EXE to fail.
sys.ini A .ini file used with syscfg.