User's Manual

24 Preparing the Directory Structure for Deployment in Microsoft
®
Windows
®
PE
4 Click Unzip .
By default, files are unzipped to
C:\ . You can unzip the DTK components to your local hard drive and
then copy them later to a network volume, or you can change the installation path to an available
network share. For example, you can unzip the files directly to the network share (for example,
Z:\ )
that you plan to use in the deployment process.
NOTE: Do not copy the DTK components to a Novell
®
NetWare
®
network volume. The DTK network-based
deployment is not supported from mapped Novell NetWare systems. The DTK utilities do not run in
Windows PE when Novell’s Client32 is loaded.
The files are unzipped in the directory structure shown in Figure 3-1.
Figure 3-1. Sample DTK Default File Structure
Workstation is the system on which the DTK components are extracted.
Source system is an optimally configured system from which the system settings are captured.
Target system is the system on which the settings captured from the source system are replicated.
The DTK utilities are in Z:\Dell\Toolkit\Tools.
The DTK sample scripts are in Z:\Dell\Toolkit\template\scripts.