Quick Reference Guide

92 RAIDCFG
Enumerating Array Disks
Table 4-5 lists the RAIDCFG options, parameters, and predefined arguments for enumerating array disks
(hard drives).
Table 4-5. Enumerating Array Disks (Hard Drives)
Mandatory Options
and Arguments
Optional
Parameter
Valid Parameter
Arguments
Description
-ad -c=id
or
adisk controllerid=
id
NA NA Lists all the array disks attached to the specified
RAID controller. This option combination is mandatory.
NOTE: You can also use pdisk or -pd instead of adisk or -
ad to specify an array disk.
Example:
A:>raidcfg -ad -c=2
Controller: PERC 4e/DC
****** Physical Drive ******
Drive Vendor: FUJITSU
Drive Model: MAP3367NC
Drive Location: 0:0:0
Drive Size: 34680 MB
Drive Avail: 0 MB
****** Physical Drive ******
Drive Vendor: SEAGATE
Drive Model: ST336607LC
Drive Location: 0:1:0
Drive Size: 34680 MB
Drive Avail: 0 MB