Quick Reference Guide

90 RAIDCFG
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:targ, ...
[or ch:targ:encl,...]
or
controller action=
createvdisk
controllerid=id
adisk=
channel:target:lun,...
channel:target:lun,...
[or channel:target:
enclosure,...]
-sz
or
-size
<number> Sets the maximum size of the virtual disk in MB or GB.
A valid argument is a number representing the
maximum size for the virtual disk. The -sz option is
optional and can be the added to the command line in
any order after the mandatory option combination.
The minimum virtual disk size that you can create for
various controllers is given below.
• For CERC-SATA 1.5/6ch controllers:
RAID 0: 10MB
RAID 1: 9MB
RAID 5: 9MB
• For PERC 3 controllers:
RAID 0: 10MB
RAID 1: 10MB
RAID 5: 10MB
• For PERC 4 (except PERC 4/IM) controllers:
RAID 0: 10MB
RAID 1: 10MB
RAID 5: 10MB
• For PERC 5 controllers:
RAID 0: 100MB
RAID 1: 100MB
RAID 5: 100MB
NOTE: If this option is not provided, RAIDCFG will determine
the maximum possible virtual disk size and create it.
NOTE: RAID 10 and 50 do not accept this option.
Table 4-4. Creating Virtual Disks (continued)
Mandatory Options
and Arguments
Optional
Parameters
Valid Parameter
Arguments
Description