Quick Reference Guide

SYSCFG 63
solcfgparams Configures and displays SOL configuration
parameters. This option can be replicated.
--solenable enable, disable Enables or disables whether the SOL payload type
can be activated. This option can be replicated.
--solprivlevel user, operator,
administrator
Sets the minimum user privilege level required to
activate the SOL. This option can be replicated.
--solcharaccuminterval 1–255 Sets the Character Accumulate Interval in 5-ms
increments (1–255). This sets the typical amount
of time that the BMC will wait before transmitting
a partial SOL character data packet. This option
can be replicated.
--solcharsendthreshold 1–255 Specifies that the BMC will automatically send an
SOL character data packet containing this number
of characters in increments of 5 (1–255) as soon as
this number of characters (or greater) has been
accepted from the baseboard serial controller into
the BMC. This option can be replicated.
--solbitrate 9600, 19200 Sets the serial channel communication bit rate
(in bps) with the BMC when SOL is activated.
This option can be replicated.
Example 1 (to display the current SOL
configuration):
A:> syscfg solcfgparams
solcfgparams
solenable=enable
solprivlevel=administrator
solcharaccuminterval=25
solcharsendthreshold=25
solbitrate=9600
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description