Quick Reference Guide

SYSCFG 61
serialuseraccess
or
sua
Configures the privilege level and channel
accessibility associated with a specified User ID for
the serial channel. This option can be replicated.
--userid 2–10 if your
system has a
DRAC 4
controller
2–16 if your
system has a
DRAC 5
controller
Sets the User ID. This suboption can be replicated.
--usrprivlmt user, operator,
administrator,
noaccess
Sets the maximum BMC user privilege level for the
serial channel for the User ID specified using the
userid suboption. This suboption can be replicated.
This suboption is dependent on the
userid suboption.
--currentenableduserids NA Reports the number of currently enabled User IDs on
the serial channel. This suboption can be replicated.
--useridswithfixednames NA Reports the number of User IDs with fixed names on
the serial channel. This suboption can be replicated.
Example 1 (to enable User ID 2 on the serial
channel with administrator privileges):
A:>syscfg serialuseraccess
--userid=2
--usrprivlmt=administrator
--status=enable
userid=2
usrprivlmt=administrator
status=enable
Example 2 (to enable User ID 4 on the serial
channel with user privileges):
A:>syscfg serialuseraccess
--userid=4
--usrprivlmt=user
--status=enable
userid=4
usrprivlmt=user
status=enable
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description