Quick Reference Guide

SYSCFG 59
--serialchannelinfo
or
sci
Displays media and protocol information about the
serial channel. This option cannot be replicated.
--mediumtype NA Displays the medium type for the serial channel.
This suboption cannot be replicated.
--prottype NA Displays the protocol type for the serial channel.
This suboption cannot be replicated.
--ssnsupport NA Displays the session support information for the
serial channel. This suboption cannot be
replicated.
--activessncount NA Displays the number of sessions that are activated
on the serial channel. This suboption cannot be
replicated.
Example:
A:>syscfg serialchannelinfo
--mediumtype
mediumtype=asynch
serialcfgparams
or
scp
Configures and displays serial configuration
parameters. This option can be replicated.
--connectionmode basic, terminal Sets the connection mode used to perform IPMI
messaging to the BMC. This suboption can
be replicated.
--msgcommflowctrl noflowctrl,
rtscts
Sets the IPMI message communication flow
control. This suboption can be replicated.
--msgcommdtrhangup NA Reports the IPMI message communication DTR
hang-up. This suboption cannot be replicated.
--msgcommbitrate 9600, 19200,
38400, 57600
Sets the IPMI message communication baud rate
in bits per second (bps). This suboption can be
replicated.
--tmcfglineediting enable, disable Sets the line editing value for terminal mode
configuration. This suboption can be replicated.
--tmcfgdelctrl del, bksp Sets the delete control value for terminal mode
configuration. This suboption can be replicated.
--tmcfgechoctrl echo, noecho Sets the echo control value for terminal mode
configuration. This suboption can be replicated.
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description