Quick Reference Guide

56 SYSCFG
pefcfgparams
or
pcp
Configures and displays PEF configuration
parameters. This option can be replicated.
--filter fanfail, voltfail,
discretevoltfail,
tempwarn,
tempfail,
intrusion,
redundegraded
, redunlost,
procwarn,
procfail,
powerwarn,
powerfail,
hardwarelogfail,
autorecovery,
batterywarn,
batteryfail,
powerabsent,
procabsent
Specifies a PEF value. This suboption can
be replicated.
See "BMC Platform Events Filter Alert Messages"
for a complete list of all possible PEF messages
along a description of each event.
--filteraction powercycle,
reset,
powerdown,
none
Sets the event filter action for the filter specified
using the filter suboption. This suboption depends
on the filter suboption. This suboption can
be replicated.
--hostname <string> Sets the host name (maximum of 48 printable
ASCII characters) for the BMC. This suboption
can be replicated.
--filteralert enable, disable Enables or disables alerts for the filter specified
using the filter suboption. This suboption is
dependent on the
filter suboption. This suboption can be replicated.
--alertpolnum 1, 2, 3, 4 Specifies the alert policy entry number. This
suboption can be replicated.
--alertpolstatus enable, disable Enables or disables the alert policy specified using
the alertpolnum suboption. This suboption can be
replicated. This suboption is dependent on the
alertpolnum suboption.
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description