Quick Reference Guide

54 SYSCFG
--loaddefaults* NA NA Restores the BMC to the defaults that were
originally loaded on the controller. This option is
used to return the BMC to a known-good state.
This option cannot be replicated.
NOTE: The NMI, power button, and SOL defaults are
not reset by using this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
NOTE: The asterisk is not part of the command
syntax.
--nextboot NA valid device
name (from
the --bootseq
option device
list)
This option sets the specified device as the first
device in the boot order for the next boot cycle
only. The device must be a device from the
--bootseq option device list. Run the --bootseq
option to see a list of available device names.
See --bootseq for more information. This option is
not replicated.
Example 1:
A:>syscfg --bootseq
Device 1: floppy.emb.0 -
Diskette Drive A:
Device 2: cdrom.emb.0 - CD-ROM
device
Device 3: hdd.emb.0 - Hard Drive
C:
Device 4: nic.emb.1 - Intel Boot
Agent Version 4.0.17
Device 5: nic.emb.2 - Intel Boot
Agent Version 4.0.17
Example 2:
A:>syscfg --nextboot=nic.emb.1
nextboot=nic.emb.1
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description