Quick Reference Guide

SYSCFG 49
--encryptkey NA <hexadecimal
number>
Encrypts the IPMI sessions.
The hexadecimal number entered as an argument
is not case sensitive although the value returned by
the encryptkey option is always in uppercase.
The value returned is appended with zeroes so that
it is always 40 characters long.
Example:
A:>syscfg --encryptkey=abcd
encryptkey=
ABCD0000000000000000000000000000000
00000
--identify NA 0–254
NOTE: Use 0 to
stop flashing
the LED.
Flashes the identification LED for a specified
number of seconds.
NOTE: This option applies only to PowerEdge
systems with a BMC.
lanchannelaccess
or
lca
Sets or displays the LAN channel access settings
such as alerting, IPMI over LAN, and user privilege.
This option can be replicated.
--pefalerting enable, disable Enables or disables PEF alerts. This suboption can
be replicated.
--ipmioverlan disable,
alwaysavail
Sets the LAN channel access mode. This suboption
can be replicated.
--channelprivlmt user, operator,
administrator
Sets the maximum privilege level accepted for the
LAN channel. This suboption can be replicated.
Example (to configure the LAN channel with alerts
and IPMI over LAN enabled):
A:>syscfg lanchannelaccess
--pefalerting=enable
--ipmioverlan=alwaysavail
lanchannelaccess
pefalerting=enable
ipmioverlan=alwaysavail
lanchannelinfo
or
lci
Displays media and protocol information about the
LAN channel. This option cannot be replicated.
Table 3-3. BMC and Remote Access Controller Configuration Options (continued)
Options Suboptions Valid
Arguments
Description