Quick Reference Guide

SYSCFG 43
--sata7 auto, off This option enables or disables SATA port 7. This option can be replicated.
Example:
A:>syscfg --sata_7=auto
sata_7=auto
NOTE:
This option maps to --sata_h for PowerEdge x9xx systems.
--snoopfilter enable, disable This option enables or disables the snoop filter option from the system BIOS.
Example:
A:>syscfg --snoopfilter=enable
snoopfilter
=enable
--speaker on, off This option turns the built-in speaker on or off. This option can be replicated.
NOTE: The --speaker option is not supported on certain PowerEdge systems.
Example:
A:>syscfg --speaker=on
speaker=on
--serial1 disable, com1,
com3,
com1_bmc,
bmcserial,
bmclan, rac
This option configures or reports the first serial port communication port.
This option can be replicated.
bmcserial — maps serial port 1 to BMC Serial.
bmclan — routes the serial traffic destined for serial1 out to NIC1.
com1_bmc — maps serial port 1 to COM port 1 BMC.
rac — maps serial port 1 to the RAC device.
Example:
A:>syscfg --serial1=rac
serial1=rac
--serial2 auto, disable,
com2, com4
This option configures or reports the second serial port communication port.
This option can be replicated.
Example:
A:>syscfg --serial2=disable
serial2=disable
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description