Quick Reference Guide

34 SYSCFG
--embnic2pxe enable, disable This option enables or disables PXE on the second embedded NIC. If PXE is
disabled, the second NIC is not found in the boot order. If PXE is enabled, the
second NIC is placed at the end of the boot order. This option is only present
on systems that do not support the embnic2 option. This option can be
replicated.
Example:
A:>syscfg --embnic2pxe=disable
embnic2pxe=disable
--embsataraid off, combined,
ata, raid
This option configures an embedded SATA RAID controller. This option can
be replicated.
off — disables the embedded SATA RAID controller.
combined — sets the SATA RAID controller to combined mode.
ata — sets SATA RAID controller to ATA mode.
raid — sets SATA RAID controller to RAID mode.
Example:
A:>syscfg --embsataraid=off
embsataraid=off
--embscsi1 on, off This option enables or disables the first embedded SCSI controller.
This option is only valid for supported systems that have an embedded
SCSI controller. This option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
--embscsi2 on, off This option enables or disables the second embedded SCSI controller. This
option is only valid for supported systems that have an embedded SCSI
controller. This option can be replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
Table 3-2. SYSCFG Options and Arguments for BIOS Configuration (continued)
Option Valid
Arguments
Description